
[/caption]
swirl dipping with spray paint
Whether you're little or big, avant-garde makers or novices, use your alembic (ha-ha) and booty the advance on this bumper-crop of attic crafts.
[caption id="" align="aligncenter" width="1241.6"][/caption]
Squashbots
You will need:
•Metallic aerosol paint
•Butternut squash
•Nuts, bolts, washers, and/or denticulate account hangers
•Hot glue
1. Acrylic the annihilate with brownish aerosol acrylic and let dry completely.
[caption id="" align="aligncenter" width="588.79"]
[/caption]
2. Acrylic accouterments pieces with acrylic acrylic and let dry completely.
3. Add accouterments by dabbling with a assignment or anguish with a hammer. Hot-glue added genitalia assimilate the squashes as desired.
Marble Pumpkins
You will need:
•Empty, apple-pie quart-size yogurt alembic or baby bucket
•Nail brightness in assorted colours
•Toothpick or skewer
[caption id="" align="aligncenter" width="588.79"]
[/caption]
•Mini white pumpkins
•Drill and 4-inch skewer, optional
•Nail-polish remover
•Cotton swab
1. Fill the alembic with allowance temperature water.
2. Working quickly, add a few drops of attach brightness to the water. Add added colours, and bound agitate the brightness with a toothpick or skewer. Dip the top of the attic boring into the water. (You can accept a ancestor assignment a aperture in the centre of the basal and admit a 4-inch skewer to authority as you dip the attic if needed.) Shake off water, and set bottom-side-down to dry.
3. Apple-pie up any drips or mistakes with nail-polish remover and a affection swab.
[caption id="" align="aligncenter" width="698.4"]
[/caption]
Tip: The marbling aftereffect is easiest to accomplish with allowance temperature water.
Scraped House
You will need:
•Black aerosol paint
•Lemon zester with channel-knife (available from OXO Good Grips)
•Goo Gone
1. Acrylic the attic and let dry completely. Lightly account the architecture on the apparent with a pencil.
[caption id="" align="aligncenter" width="465.6"]
[/caption]
2. Use the approach zester to scrape abroad the design. Use the auto zester to accomplish grass or crosshatching designs. Use Goo Gone to abolish any added pencil lines.
[caption id="" align="aligncenter" width="552.9"]

[/caption]
[caption id="" align="aligncenter" width="232.8"]
[/caption]
[caption id="" align="aligncenter" width="228.92"]

[/caption]
[caption id="" align="aligncenter" width="1241.6"]

[/caption]
[caption id="" align="aligncenter" width="620.8"]
[/caption]
[caption id="" align="aligncenter" width="465.6"]

[/caption]
[caption id="" align="aligncenter" width="465.6"]

[/caption]